BJ-130 Printer
General Info:
Alternative Drivers
Drivers you can use if the BJ-130 driver is not available.
Cartridge
Serial Number
Location - Cream colored label on the back of the printer
Prefixes - TAA, TAJ...
Known Issues
Cannot Print in Windows 98
If you cannot print in Windows 98, make sure that the printer port is set to either SPP, Standard, or Normal in the computer's BIOS.
Prints light in Windows, OK in DOS
Set DIP switch 1-8 to HQ mode (OFF) and switch 1-9 High Density ON. The switches are located behind the front panel
DIP Switches
BJ-130 XL Mode (Use this mode for Windows)
|
Switch |
Function |
ON |
OFF |
Factory Setting |
|
1 |
Buzzer |
OFF |
ON |
OFF |
|
2 |
Zero Character |
With Slash |
NO Slash |
OFF |
|
3 |
Auto Line Feed |
CR with LF |
CR only |
OFF |
|
4 |
Page Length |
12 inch |
OFF |
OFF |
|
5 |
Auto Carriage Return |
LF with CR |
LF only |
OFF |
|
6 |
Line-Feed Pitch |
1/8 inch |
1/6 inch |
OFF |
|
7 |
1 Inch Perforation Skip |
ON |
OFF |
OFF |
|
8 |
Print Mode |
HS (Draft) |
OFF |
OFF |
|
9 |
Image Print Density |
High |
Normal |
OFF |
|
10 |
Interface |
Serial (RS-232) |
Parallel |
OFF |
|
Switch |
Function |
ON |
OFF |
Factory Setting |
|
1 |
Right Margin |
80 |
136 |
OFF |
|
2 |
Character |
IBM |
EPSON |
OFF |
|
3 |
Auto-LF |
Set fixed (low) |
Not internally set |
OFF |
|
4 |
SLCT-IN Signal |
Not Internally set LF |
Set to Low |
OFF |
|
5 |
International Character (IBM) |
Norway/Denmark |
USA/International |
OFF |
|
6,7,8,9 |
Int'l Character Set |
OFF |
USA OFF,OFF,OFF,OFF |
USA |
|
10 |
Bottom Margin |
1 Inch |
1/2 Inch |
OFF |