BJC-35v Printer

General Info:

Cartridges

• BCI-10 - Ink Tank (Black)
• BC-10 - Print Head
• BCI-11 Black - Ink Tank (Black BC-11)
• BCI-11 Color - Ink Tank (Tri Color BC-11)
• BC-11e - Print Head (Color)

Error Codes

Error	Cause	Solution
C1	Waste Ink Warning	Press Online to continue printing, Note to stop this error you are require to take the printer in for service.
C5	Low Battery Warning	Try recharging the battery
E1	Paper Pickup Error or out of paper	Add Paper or clear paper jam and press the ONLINE button.
E2	Paper Delivery Jam	Clear paper jam and press the ONLINE button.
E6	Not detecting the print head	Install the print head or replace it
FC	Low Battery Error	Try recharging the battery, if this fails replace the Ni CAD battery
F12	Print Head Temperature Error	Try installing a NEW print head, if the problem continues the printer requires service
F13	Print Head Installation Error	Try installing a NEW print head or reinstalling the print head, if the problem continues the printer requires service
F14	Waste Ink is Full	Requires Service. See below to reset.
Online button is blinking	Cartridge/Print head not detected	Check and see if the print head is sitting in the middle. Typically means replacement of the print head, try reseating the print head

F14 Error Reset

1: Unplug adapter
2: Hold POWER
3: Plug in ADAPTER
4: Release POWER after printer starts
5: Hold FF and MENU and press POWER
6: Release after beeps
7: Press <> Cartridge until 1A is displayed
8: Press ONLINE
9: Press POWER to shutoff printer
10: Unplug printer then re-plug printer