BJC-6000 Printer

General info:

Cartridges

• BC-30 - Black Cartridge (Head)
• BCI-3BK - Ink Tank (Black)
• BC-31 - Color Cartridge (Head)
• BCI-3C - Ink Tank (Cyan)
• BCI-3M - Ink Tank (Magenta)
• BCI-3Y - Ink Tank (Yellow)
• BC-32 - Photo Color Cartridge (Head)
• BCI-3PBK - Ink Tank (Black)
• BCI-3PC - Ink Tank (Cyan)
• BCI-3PM - Ink Tank (Magenta)
• BCI-3PY - Ink Tank (Yellow)

Serial Number

Located inside printer, open access cover, left of center

Error Codes

Error Condition	Indicator	BEEPS	Error Code	Possible Solution
Paper Feed/Delivery	Orange	2		Remove any paper jammed
Paper Jam	Orange	3		Remove any paper jammed
Ink Out	Orange	4		Add Ink
BJ Cartridge Mismatch	Orange	5		Re-install cartridge or replace it. See notes below for correct positions
NO BJ Cartridge	Orange	6		Re-install cartridge or replace it
BJ Cartridge Error	Orange	7		Re-install cartridge or replace it
Waste Full warning	Orange	8		Waste is almost full, needs service very soon
Auto Head Adjustment Error	Orange	9		Is there Black and Cyan ink ? Auto Alignment requires Black and Cyan inks.
ROM Error	1 x Orange	10		Try unplugging the printer for 30 seconds, if not requires service.
RAM Error	2 x Orange	10		Try unplugging the printer for 30 seconds, if not requires service.
EEPROM	3 x Orange	10	6800	Try unplugging the printer for 30 seconds, if not requires service.
Home Position	4 x Orange	10	5100	Make sure nothing is blocking the cartridge movement, if not requires service.
Temperature Sensor	5 x Orange	10	5400	Try unplugging the printer for 30 seconds, if not requires service.
Waste Full	6 x Orange	10	5B00	Needs Service
Cartridge Overheat	7 x Orange	10	5200	Replace the BJ Cartridge(Print head)
Cartridge Overheat	8 x Orange	10	5200	Replace the BJ Cartridge(Print head)
Cartridge Displaced	9 x Orange	10	5600	Replace the BJ Cartridge(Print head) or reinstall
	None	None	5910	Needs Service
	None	None	5C00	Needs Service

Waste Error Reset

1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5. Release Power button
6: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
7: Press Power to set data

Notes - BJ Cartridge Mismatch

This error can be caused by installing the BJ Cartridges (Print heads) in the wrong position in the printer. The Correct combination are as follows

Left Holder	Right Holder
BC-30	BC-31
BC-32	BC-31

Insure the Cartridge lock levers are down. Reinstall both Cartridges