BJC-620 Printer

General

Alternative Drivers

Drivers you can use if the BJC-620 driver is not available.

• DOS : BJ-200/200e/200ex (BJ Mode/Black)
• DOS : Epson LQ2550 (LQ Mode Colour/Black)

Cartridges

• BJI-201BkHC - Black Ink Tank
• BJI-201C - Cyan Colour Ink Tank
• BJI-201M - Magenta Colour Ink Tank
• BJI-201Y - Yellow Colour Ink Tank

Cleaning Print Head

Press PRINT MODE + ENVELOPE until beeper sounds. Use PRINT MODE to select 1, and press ENVELOPE to start clean.

Self Tests

Colour Pattern : With the Printer switched off, press and hold the FF button, and press the POWER button until the printer beeps. When the POWER light starts to flash, release both buttons. When the POWER light stops flashing, the printer starts to print the color pattern. To stop printing the test, press the POWER button to turn off the printer.

Font Pattern : With the printer switched off, press and hold the PRINT MODE button, and press the POWER button until the printer beeps. When the POWER light starts to flash, release both buttons. When the POWER light stops flashing, the printer starts to print the Font Pattern. To stop printing the test, press the POWER button to turn off the printer.

Nozzle Check Pattern : With the printer switched off, press and hold the ONLINE button, and press the POWER button until the printer beeps. When the POWER light starts to flash, release both buttons. When the POWER light stops flashing, the printer starts to print the Nozzle Check Pattern. To stop printing the test, press the POWER button to turn off the printer.

Serial Number

Location - Cream coloured label on the back of the printer near the power cord
Prefixes - TYN...

Special Paper

• CF-102A4 - Transparencies. Used for producing overhead transparencies.
• GP-101A4 - Glossy Paper. Heavier coated paper, used for graphics.
• LC-101A4 - Coated A4 Paper. Coated paper used for high quality print.
• LC-301A4 - BubbleJet Paper A4. Lightly coated, water resistant everyday usage paper.
• FS-101 - Fabric Sheet. Allows images to be printed onto 100% Cotton fabric (Machine Washable).
• BF-102A4 - Back Print Film A4. Used to produce back-lit displays.
• HG-101 - High Gloss Film A4. Gives documents a Gloss finish, used for reports/graphics.
• TR-101 - T-Shirt Transfer. Images can be printed onto the transfer material and then ironed onto T-shirts, Sweaters, etc..

Known Issues

Sharing With Other Parallel Port Devices

The Canon BJC-620 printer has a bidirectional communication feature. This feature does not share the parallel port, and can cause problems when you try and share the parallel port with other devices, for example scanners. You can correct this problem by downloading the Non-WPS Printer Drivers from Canon's Website.

After installing new Cartidges, the Error light flashes and ink light is lit

The Ink detection may require callibration, as follows

• Turn off the printer
• Remove all the ink tanks. (Cartridges)
• Unplug the printer (maybe easiest to unplug from back of printer).
• Set paper thickness lever to the plain paper position (DOWN). (Lever beside black cartridge)
• Close the printer cover.
• Hold POWER and FF buttons while plugging the printer in.
• After tone(s) and print head mechanism stops moving, press ONLINE.
• You should hear more tone(s).
• Set paper thickness lever to the envelope position (UP).
• Close the Printer Cover.
• Press FF button. There should be more tone(s) and then it shuts itself off.
• Unplug the printer.
• Install all ink tanks.(Cartridges)
• Set paper thickness lever back to the plain paper position.

Problems using Printer with Logitech Pagescan

When the printer is connected to the computer through a Logitech Pagescan, it does not function correctly. The solution is to remove the word WAKEUP.DLL from the system.ini file.

Ink Sensor / Paper Thickness Calibration fails

This can be caused by dirt on the sensor preventing proper operation. To clear this,

• Open the cover on the printer to expose the cartridges.
• Unplug printer
• Replug printer
• Power up printer
• When the printhead moves away from the right, quickly unplug the printer.
• At this point you should be able to move the printhead to the left,
• The INK SENSOR will be exposed well enough to clean, the sensor is located just behind the front silver rail.
• Clean the Sensor and area near it.
• Replug in the printer and Power up

Colours not Printing properly

Make sure that you have printer driver set to Colour Matching.

Windows 95 crashes after installing printer driver.

Computer lockups after rebooting from Windows Printing System driver installation. This typically happens after upgrading from Windows 3.1x to Windows 95. The solution is to edit the System.ini file and remove the MinTimeSlice line.

Error Codes

Power	Beeps	Error	Online	BK	C	M	Y	Ink	Env	Error Condition	Solution
On		OFF	ON							Ready
On	2	On								Paper jam or out of paper	Add paper or remove the paper jam and press ONLINE to continue
On	2							Blink	Blink	WASTE INK warning	You can continue printing by pressing ONLINE however the printer is due for service
On	2							Blink	Blink	INK OUT - The printer is out of INK , Note any combination of BK, C, M or Y may blink	Replace or check the ink cartridges that have BLINKING lights - BK = Black, C = CYAN, M = Magenta, Y = Yellow
On	3	Blink							On	This indicates Carriage Error (Printhead movement)	See notes below on Encoder Errors. If that doesn't work, printer requires a service
On	3	Blink						On		Home Position Error (Printhead movement)	Requires Service
On	3	Blink						On	On	Encoder Error (Printhead movement)	See notes below on Encoder Errors. If that doesn't work, printer requires a service
On	3	Blink					On			Paper Feed Motor Error	Requires Service
On	3	Blink					On		On	Auto Sheet Feeder Home Position Error	Requires Service
On	3	Blink					On	On		Internal Temperature Error	Requires Service
On	3	Blink				On				WASTE INK is Full	Requires Service
On	3	Blink				On			On	This indicates EEPROM Error	Requires Service
On	3	Blink		ON						ROM Error	Requires Service
On	3	Blink		On			On			RAM Error	Requires Service
On	3	Blink				On		On		Gate Array Error	Requires Service
On	3	Blink				On		On	On	Ink Detection	See Notes for Recalibration Method
On	3	Blink								PrintHead Error	Requires Service, Possibly remove printhead and reinstall may resolve problem. Any combination of BK,C,M,Y may be be blinking

Notes - Encoder Error

If you receive an encoder error, try the following,

• Power off the printer
• Unplug the printer power cord
• Hold PRINT MODE and POWER buttons and plug in the printer's cord
• Release the buttons after the tones (beeps)
• Wait until the printer finishes, and power off
• Unplug the printer
• Plug it back in

Print mode is the button below the 4 Leds (BkCMY)

Notes - Recalibration Procedure

• Turn off the printer
• Remove all the ink tanks. (Cartridges)
• Unplug the printer (maybe easiest to unplug from back of printer).
• Set paper thickness lever to the plain paper position (DOWN). (Lever beside black cartridge)
• Close the printer cover.
• Hold POWER and FF buttons while plugging the printer in.
• After tone(s) and print head mechanism stops moving, press ONLINE.
• You should hear more tone(s).
• Set paper thickness lever to the envelope position (UP).
• Close the Printer Cover.
• Press FF button. There should be more tone(s) and then it shuts itself off.
• Unplug the printer.
• Install all ink tanks.(Cartridges)
• Set paper thickness lever back to the plain paper position.

Waste Error Reset

1: Unplug Power Cord
2: Hold POWER and FF and Print Mode buttons
3: Plug in Power Cord
4: Release after the beeps

DIP Switches

BJ Mode

Switch	Function	On	OFF	Factory Setting
1	Horizontal Print Position	A4	Letter	OFF
2	Text Scale Mode	Enabled	Disabled	OFF
3	Character Set	Set 2	Set 1	OFF
4	Code Page	See Table 1		OFF
5	Code Page	See Table 1		OFF
6	Code Page	See Table 1		OFF
7	Page Length	12 inches	11 Inches	OFF
8	Alternate Graphics Mode	Enabled	Disabled	OFF
9	Automatic Carriage Return	Line Feed = LF+CR	Line Feed = LF	OFF
10	Automatic Line Feed	CR + LF	CR Only	OFF
11	Printer Control Mode (DOS)	Epson LQ-2550	BJ-10/IBM X24e	OFF
12	Not Used			OFF

Table 1 - Code Page for BJ mode

Code Page	Switch 4	Switch 5	Switch 6
850	OFF	OFF	ON
437	OFF	OFF	OFF
860	ON	ON	ON
863	OFF	ON	ON
865	ON	OFF	OFF

LQ MODE

0.0p

Switch	Function	On	Off	Factory Setting
1	Horizontal Print Position	A4	Letter	OFF
2	Text Scale Mode	Enabled	Disabled	OFF
3	Character Set	Graphics	Italics	OFF
4	Int'l Character Set	See Table 2		OFF
5	Int'l Character Set	See Table 2		OFF
6	Int'l Character Set	See Table 2		OFF
7	Typeface	See Table 3		OFF
8	Typeface	See Table 3		OFF
9	Typeface	See Table 3		OFF
10	Automatic Line Feed	CR + LF	LF	OFF
11	Printer Control Mode (DOS)	Epson LQ-510	BJ-10/IBM X24e	ON
12	Not Used			OFF

Table 2 : International Character Set

Country	Switch 4	Switch 5
Switch 6
USA	OFF	OFF	OFF
UK	OFF	OFF	ON
Germany	OFF	ON	OFF
France	OFF	ON	ON
Denmark	ON	OFF	OFF
Sweden	ON	OFF	ON
Italy	ON	ON	OFF
Spain	ON	ON	ON

Table 3 : Typeface

Typeface	Switch 7	Switch 8	Switch 9
Roman	OFF	OFF	OFF
Sans Serif	OFF	OFF	ON
Draft	OFF	ON	OFF
Courier	OFF	ON	ON
Prestige	ON	OFF	OFF
Script	ON	OFF	ON
Orator	ON	ON	OFF
Orator-S	ON	ON	ON