BJC-8000 Printer

Error Codes

Error Condition	Power Error LED	BEEPS	Possible Solution
Paper Feed/Delivery	Steady	2	Remove any paper jammed
BC-60 Out of Ink	Steady	3	Replace BCI-60
BC-61 or BC-62e Out of ink	Steady	4	Replace BCI-61 or BCI-62
Cartridge Error	Steady	5	BC-60 Cartridge must be in the left holder and BC-61/62e must be in right holder. Remove the BJ Cartridge, check that the contacts are clean and the white tape was removed. Try a new BJ Cartridge (not the BCI ink cartridge).
Waste Full warning	Steady	6	Waste is almost full, needs service very soon
BJ Cartridge has overheated	Steady	7	Let the printer cool down for 15 minutes, then press RESUME to restart the printing.
Service Errors	BLINKS	8	Requires service

Waste Error Reset

1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
6: Press Power to set data.