BJC-4650 Printer

General Info:

Alternative Drivers

Drivers you can use if the BJC-4650 driver is not available.

• DOS : BJ-200/200e/200ex (BJ Mode/Black)
• DOS : Epson LQ2550 (LQ Mode Color/Black)

Cartridges

• BC-20 - Black Ink
• BCI-21bk - Black Ink Tank (BC-21)
• BCI-21c - Tri Color Ink (BC-21)
• BC-21e - Color Print Head
• BC-22e - Photo Ink
• BC-29f - Fluorescent Ink

Cleaning Print Head

With the printer online, hold down the RESUME button for 2 beeps.

Self Test

Demo Test : Switch Printer off. Hold down power button for 1 beeps. Press RESUME to stop.
Status Test : Switch Printer off. Hold down power button for 2 beeps. Press RESUME to stop.
Ripple Test : Switch Printer off. Hold down power button for 3 beeps. Press RESUME to stop.
Nozzle Test : Switch Printer off. Hold down power button for 4 beeps. Press RESUME to stop.

Known Issues

When an image is scanned, it prints 4 times bigger then the page

This happens when you are using PAINT to print from. Use the software that came with the scanner or use any graphical/Desk Top Publishing software.

"Error D210 your Color-Sync or Canon profiles...."

I've just installed Mac OS 8.5 and my printer will no longer work.

Firstly make sure you are using v2.04 or higher printer drivers. It may also be caused by the coloursync profiles have been installed by the installer in the incorrect location. Previous versions of the MAC OS install into system\preferences\colorsync profiles. MacOS 8 and above now has the default location in system\colorsync profiles. The fix is to move all the profiles into system\colorsync profiles.

Problems with Cartridge Detection

• Power off the printer
• Unplug the printer's power cord, wait 5 seconds then re-plug the power cord in.
• Hold the Power button for 6 Beeps
• Release the Power Button

This will reset the printer and should resolve incorrect cartridge detection problems.

Error Codes

Power/Error	Indicator Color	Beeper	Error/Cause	Solution
Off			No Power
On	Green		Ready State
On	Orange	1	Paper Pickup Error or out of paper	Add Paper or clear paper jam and press Resume
On	Orange	2	Paper Jam	Clear paper jam and press Resume
On	Orange	5	Cartridge Mode Mismatch	When wrong cartridge is installed for Printing or Scanning.
Blinks	Green	1	Cartridge Not detected	Install or replace cartridge. You will notice the carriage will be in the middle position.
Blinks	Green<>Orange	1	RAM Error	Unplug the printer for 20 seconds, if problem persists then printer Requires a Service.
Blinks	Green<>Orange	2	ROM Error	Unplug the printer for 20 seconds, if problem persists then printer Requires a Service.
Blinks	Green<>Orange	evelpan>	BJ Cartridge Displacement error	Try replacing the Cartridge or Requires Service
Blinks	Green<>Orange	4	Home Position Error	Remove the cartridge and check to make sure nothing is blocking the path of the carriage, if not then the printer requires a service
Blinks	Green<>Orange	5	Waste Full	Requires Service
Blinks	Green<>Orange	6	Temperature Sensor Error	Try replacing the Cartridge or Requires Service
Blinks	Green<>Orange	7	Print Position	Unplug the printer for 20 seconds, if problem persists then printer Requires a Service.
Blinks	Green<>Orange	8-9	Head temperature or sensor error	Try replacing the Cartridge or Requires Service
Blinks	Green<>Orange	10	Cleaning Error	Remove the cartridge and check to make sure nothing is blocking the path of the carriage, if not then the printer requires a service
Blinks	Green<>Orange	11	Scanner Cartridge IS-22 Displacement	Occurs when the IS scanner cartridge is detected but cannot correctly identify it, Try resetting the IS cartridge

Waste Error Reset

Unplug Power Cord
Hold POWER and RESUME buttons
Plug in Power Cord
Release buttons
Open front door of printer
Hold the CARTRIDGE and RESUME buttons
Press POWER
Release all buttons after the beeps
Press CARTRIDGE once
Press RESUME